Skip to content

Dehydrated potato for snacks and pellets

Controlled water absorption in extrusion. ECOCORE granules absorb water in a constant ratio, so the pellet dough behaves the same in every batch.

  • granules 0.01–0.5 mm (5 fractions)
  • potato granules 0.01–0.5 mm
  • potato flakes alternative, 1:1 replacement
  • 100% potato
ECOCORE potato granules, fine fraction

In extrusion the result is decided by water: how much the raw material absorbs and how fast. Dehydrated potato with a constant fraction and starting moisture gives a dough that behaves the same in every batch.

Problem and solution

Where dehydrated potato pays for itself

Snack pellets and extruded snacks

Problem

The pellet dough has to absorb water in the same ratio in every batch – otherwise the extrusion parameters have to be adjusted with every change of raw material.

What dehydrated potato brings

Granules absorb water in a constant ratio – granules up to 1:4.5. The pellet dough behaves the same in every batch.

Replacing flakes in the recipe

Problem

The snack recipe is built on potato flakes, and a change of raw material must not mean a new recipe.

What dehydrated potato brings

Granules and powder replace flakes 1:1, at the same dosing stage – after the first trial the food technologist adjusts only the amount of water.

Selection

Choosing the fraction for the product

The final choice of fraction is confirmed by a food technologist in a trial.

Product typeProductFraction
Pellets for extrusionpotato granules0.01–0.1 mm · 0.01–0.25 mm (from five fractions)
Extruded snackspotato granules0.01–0.5 mm (5 fractions)
Replacing flakes in the recipepotato granules or potato powder0.01–0.5 mm
Proof

A 1:1 replacement trial on your line

A batch with dehydrated potato alongside a batch with flakes, on the same day and the same shift – record the results of both batches in the protocol.

PDF1:1 replacement trial protocolA sheet for recording results: reference batch, dosage, water adjustment, assessment.
FAQ

Questions from this industry

Potato granules, in five fractions within 0.01-0.5 mm and with a bulk density of 825 g/l; for pellets and extruded snacks the finest ranges are the starting point, 0.01-0.1 mm and 0.01-0.25 mm. They bind water in a constant ratio, up to roughly 1:4.5, and keep the ingredient list at one item: potato. The fraction is confirmed in a trial on your line.

Both fine forms absorb water in a constant ratio, so the choice of fraction depends on the recipe and the line; the starting point is 0.01-0.1 mm or 0.01-0.25 mm out of five available. We confirm it in a trial, usually on two fractions at once. Bulk density is 825 g/l, which matters where the dosers are set volumetrically.

Up to 1:4.5 - as a guide, 1 kg of granules and 4.5 l of water gives about 5.5 kg of mass. Flakes in the example analysed bind 1:4, so 1 kg and 4 l give about 5 kilograms. The exact ratio for your recipe is confirmed in a trial, and the values for a batch are given in the specification / TDS.

Yes - granules and powder replace flakes 1:1, at the same dosing stage, with no process change. Only the amount of water changes, and the food technologist adjusts it after the first trial. Expansion parameters we do not give, because they depend on the line; what we provide are the material parameters from the specification.

From a single bag, with no fixed MOQ. We pack in 10, 15 and 25 kg paper bags or in a big bag, on pallets of 120×100 or 120×80 cm with a maximum of 1,000 kg, and the standard lead time is 14 days. Free samples for a line trial go out within a maximum of 5 working days of the request.

Record the water added to the mass, the moisture of the pellet before drying and the expansion of the finished snack, each against your reference batch. Those three show whether only the water needs adjusting or whether a different fraction is the answer. Keep the batch number from the bag label with the measurement, so the run can be traced back.

Knowledge base

Guides on this topic

Other applications

The same line, a different industry

Describe your process and volume and a food technologist will select the fraction and starting parameters – write to our sales team.